Technically, R2Gate plans and designs a sleeveless guide, so metal sleeves are not necessary. However, there are options to include metal sleeves.
Occlusal View of R2Guide
a. Guide hole for drilling & implant placement
b. Drill stopper to control drilling depth
c. Guide-hole window to control depth & hex of implant
e. Seating holes: check fit with cusp tips
Inside View
d. Gingiva extension: guide hole is extended to sub-gingiva. It is normally trimmed but retained in case of open-flap surgery.
Cross Section of the Guide Hole
For other implant planning software, metal sleeves are required.
Metal sleeves
| Sleeves | Narrow | Regular | Wide |
| Reference Code | R2SS35P | R2SS50P | R2SS65P |
You can contact customer service at 844-288-5425 to order or contact your local sales representatives.